Phottix Odin for Nikon User Manual download pdf (Page 7)

Turning the TCU and receiver on/o

Groups and Channels

The TCU

Connecting to the camera hot shoe

1. To turn on the Phottix Odin TCU: Press and

hold the Power Button until an image appears

on the LCD screen.

To turn o: Press and hold the Power Button

until the LCD screen goes blank.

2. To turn on the Phottix Odin receiver: Move

the power switch to the “ON” position.

To turn o the receiver by moving the power

switch to the “OFF” position.

1. The Phottix Odin System has 3 groups: A, B,

and C, and 4 transmission channels: 1, 2, 3, 4.

2. Receivers can be assigned both group and

channel designations.

3. The TCU will allow EV, Power Level and Zoom

setting adjustments to be set for each group of

receivers set to same channel (if the group is

not disabled on the TCU)

1. Turn o the camera.

2. Slide the Odin TCU into the camera’s hot

shoe mount.

7

En

INSTRUCTION MANUAL

6. When the battery power on receivers is very

low, the LED will ash red light every 2 seconds.

Please change the batteries.

1 2 3 4 5 6 7 8 9 10 11 12 ... 119 120

Comments to this Manuals

No comments